Description

Charnwood PT200 Bench Top 8” x 5” Planer Thicknesser

About Charnwood PT200 Bench Top 8” x 5” Planer Thicknesser

Light enough to move off the bench when not in use and yet tough enough to produce 8″ x 5″ timber into flat and dimensioned pieces.

The planing beds are precision ground aluminium and the guide fence is a rigid aluminium extrusion which can be tilted and locked at any angle up to 45 degrees when required.

The steel thicknessing bed has an extension arm on the outfeed side and is supported in each corner by chain driven adjusting screws. Once the height is set, rubber coated feed rollers pass the timber through the high speed cutter block leaving a beautiful finish with no roller marks.

The redesigned dust hood now has a quick action clamp to allow faster removal when changing between Planing and thicknessing modes. The hood fits onto the thicknessing bed during planing operations and is then moved over the top when thicknessing. As a safety feature a location sensor detects that the dust hood has been correctly fitted before allowing the motor to run.

Supplied with re-grindable knives, 63mm & 100mm diameter dust extraction outlets, blade setting tool, 4 adjustable rubber feet, push pad, 2.0m power cable and UK 3 pin plug.

Specifications for Charnwood PT200 Bench Top 8” x 5” Planer Thicknesser

SpecificationValueSurfacing width204mm (8″

Length of surfacing tables740mm

Maximum planing depth of cut

2mmFence tilt90 – 45

Table height360mm

Thicknessing capacity5 – 125mm (1/4″ – 5″)Length of thicknessing table270mm

Feed speed

8m/min

Maximum depth of cut 2mm

Cutterblock speed 9000rpm

Number of knives 2

Motor (carbon brush)1500w (2hp), 240v

Dimensions (WxDxH)830mm x 400mm x 460mm

Weight28kg

Assembly Time Required 5 Minutes Max.

Runtime Without Rest 30 Minutes

Rating Hobby

Product Guarantee5 Years

Please contact us if this is to be picked up to allow time for it to arrive.