Description

Charnwood B300P 12” Premium Woodworking Bandsaw Package Deal

B300 Bandsaw Package: Save £60.00

B300 Bandsaw

BB15 Woodpecker Blade 22400mm x 6mm(1/4″)x 6tpi

BB17 Woodpecker Blade 2240mmx10mm (3/8″) x 4tpi

BB18 Woodpecker Blade 2240mm x 16mm(5/8″) x 4tpi

W522 Wheel Base

Premium Grade 12” Woodworking Bandsaw

• 6” Cutting Depth Capacity
• 12” Cutting Width (Throat)
• Supplied with High Quality British Made Blade
• Precision Ground Cast Iron Work Table
• Quick Action Locking On Rip Fence
• Crosscutting Mitre Guide Included
• Quiet Induction Motor
• Mains Powered LED work Light
• Integral Dust Collection Tray
• Includes Floor Stand
• Primarily used for Woodworking

Charnwood B300P 12” Premium Woodworking Bandsaw Package Deal

A floor standing woodworking bandsaw with a cutting capacity of 150mm (6″), big enough for most workshops. The power is delivered by a quiet induction motor with a belt drive to the bandsaw wheel. A two speed pulley allows the correct blade speed to be selected, depending on the hardness of the material being cut. The key to straight and accurate cutting on a bandsaw is to have a good set of blade guides. The B300 has three bearings on the blade guard. The two sealed bearings mounted side-on to the blade, control blade twist and keep it true. The rear bearing takes the thrust of the back of the blade allowing it to run freely. The same setup is then repeated beneath the table.

The cast iron table tilts from 90 degrees to 45 degrees, on a rack & pinion, and has a positive stop at both of those positions. Any angle in between can be read off the scale and locked in. For rip cuts the guide fence can be situated on either side of the blade, can be locked into position with a single press of the lever and has a clear marker to set against the metric scale. The fence itself can be fitted in two ways. When cutting thicker material the full face height of 60mm is used. When cutting thin and narrow strips the fence is fitted with the small face, against the blade to allow clearance around the guides. The bandsaw is fitted with an LED work light on a flexible stem, so that the work area will always be well lit.

The two doors are fitted with safety locks which cut power to the motor when the doors are open for blade changing or cleaning.

Tensioning the blade correctly is made simple thanks to the features on this premium model. A blade tension lever quickly sets the tension. After a blade change fine tuning can be carried out with the aid of a tension indicator and scale. The required tension varies according to blade width. A window in the top door allows the operator to confirm blade tension is correct and make an adjustment when necessary.

A dust extractor is always recommended when using a bandsaw. The dust collection outlet has 3 rings which allow it to accept 3 sizes of hose, 50mm, 75mm & 100mm diameter making it compatible with any type of extraction system. If extraction is not being used however, the bandsaw is fitted with an integral dust collection draw. Dust falling into the base of the machine will be collected here, allowing it to be quickly and easily emptied.

Supplied with 1/2” x 4tpi blade, rip fence, mitre fence, work light, floor stand, 2.0m power cable and UK 3 pin plug.

This Bandsaw is fitted with a High Quality, British manufactured blade with precision ground teeth for incredible cutting results.

Charnwood B300P 12”

Charnwood B300 Specification

Maximum cutting depth165mm (6″)

Throat width305mm (12″)

Max. cutting width with fence185mm Left / 180mm Right

Table size 480mm x 390mm

Table Height1000mmTable tilt 0-45 degrees

Mitre Guide T-Slot (x2)16mm / 20mm

Cutting speed 800 & 370m/min

Motor (induction)750w (1hp)

Blade length2240mm

Blade widths 6-20mm (1/4″ – 3/4″)

Dimensions (WxDxH)790mm x 580mm x 1600mm

Weight 62Kg

Assembly Time Required 45 Minutes (Needs 2 People)

RatingLight Trade

Product Guarantee5 Years

Charnwood B300P 12”

W522 Universal Wheel Base

Universal Wheel Kit with wide pedal design and heavy weight capacity.

Constantly having to push one machine to the back of the workshop to make space to bring another one forward?

Convert your machines into portable units by adding this highly adaptable wheel base. There are two fixed wheels and two steering wheels allowing excellent manoeuvring across a relatively flat floor surface. Step on the two foot plates to lower the wheels for moving the machine, then raise the two foot plates to lower the base back onto the adjustable rubber feet.

The base can be assembled either as a square shape or a rectangle shape to suit the footprint of the machine being mounted.

It can be used with a huge variety of machines including Planer Thicknessers, Table Saws, Bandsaws, Spindle Moulders and Lathes.

Charnwood W522 Specification

Minimum square size340mm x 340mm

Maximum square size930mm x 930mm

Maximum rectangle size520mm x 1340mm

Maximum weight load295kg

Assembly Time Required 20 Minutes

Rating Light trade

Product Guarantee 1 Year

Charnwood B300P 12”  This item can only be delivered to Mainland UK, if ordered out width of Mainland UK a Refund will be issued.