Description

Charnwood B250P 10” Bandsaw With Floor Stand Package Deal

B250 Bandsaw Package: Save £27.00

B250 Bandsaw

BB25 Woodpecker Blade 1826mm x 6mm(1/4″)x 6tpi

BB27 Woodpecker Blade 1826mm x 13mm (1/2″) x 6tpi

W522 Wheel Base

Premium Grade 10” Woodworking Bandsaw.

• Huge 6” Cutting Depth Capacity
• 10” Cutting Width (Throat)
• Supplied with High Quality British Made Blade
• Precision Ground Cast Iron Work Table
• Quick Action Lock On Rip Fence
• Crosscutting Mitre Guide Included
• Quiet Induction Motor
• Mains Powered LED work Light
• Integral Dust Collection Tray
• Includes Floor Stand
• Primarily used for Woodworking

A compact floor standing woodworking bandsaw with a massive cutting capacity, for a machine of this size and price, of 150mm (6″). The big capacity makes it an ideal choice for woodworkers who are short on space. The power is delivered by a quiet induction motor with a belt drive to the bandsaw wheel.

The key to straight and accurate cutting on a bandsaw is to have a good set of blade guides. The B250 has three sealed bearings on the blade guard. Two mounted side-on to the blade to control blade twist and keep it true. The rear bearing takes the thrust of the back of the blade allowing it to run freely. The same setup is then repeated beneath the table.

The cast iron table tilts from 90 degrees to 45 degrees and has a positive stop at both of those positions. Any angle in between can be read off the scale and locked in. For rip cuts the guide fence can be situated on either side of the blade, can be locked into position with a single press of the lever and has a clear marker to set against the metric scale. The fence itself can be fitted in two ways. When cutting thicker material the full face height of 60mm is used. When cutting thin and narrow strips the fence is fitted with the small face, against the blade to allow clearance around the guides.

The two doors are fitted with safety locks which cut power to the motor when the doors are open for blade changing or cleaning.

A dust extractor is always recommended when using a bandsaw. The dust collection outlet has 3 rings which allow it to accept 3 sizes of hose, 50mm, 75mm & 100mm diameter making it compatible with any type of extraction system. If extraction is not being used however, the bandsaw is fitted with an integral dust collection draw. Dust falling into the base of the machine will be collected here, allowing it to be quickly and easily emptied.

Supplied with 3/8” x 6tpi blade, rip fence, mitre fence, work light, floor stand, 1.8m power cable and UK 3 pin plug.

This Bandsaw is fitted with a High Quality, British manufactured blade with precision ground teeth for incredible cutting results.

Charnwood B250 Bandsaw Specification

Maximum cutting depth150mm (6″)

Throat width245mm (10″)

Max. cutting width with fence105mm Left / 120mm Right

Table size360mm x 320mm

Table Height940mm

Table tilt90-45 degrees

Mitre Guide T-Slot8.5mm / 14mm

Cutting speeds 400 & 800m/minMotor (induction)375w (1/2hp)

Blade length 1826mm

Blade widths6-13mm (1/4″ – 1/2″)

Dimensions (WxDxH)670mm x 530mm x 1450mm

Weight41Kg

Assembly Time Required 45 Minutes

Rating Light Trade

Product Guarantee5 Years

The primary use of this bandsaw is for woodworking and the blade supplied is suitable for cutting both hard and soft woods. The blade supplied can also cut Non-ferrous metals, Plastic and Acrylic. It is possible to use this bandsaw for cutting other materials, but only with a suitable blade fitted.

W522 Universal Wheel Base

Universal Wheel Kit with wide pedal design and heavy weight capacity.

Constantly having to push one machine to the back of the workshop to make space to bring another one forward?

Convert your machines into portable units by adding this highly adaptable wheel base. There are two fixed wheels and two steering wheels allowing excellent manoeuvring across a relatively flat floor surface. Step on the two foot plates to lower the wheels for moving the machine, then raise the two foot plates to lower the base back onto the adjustable rubber feet.

The base can be assembled either as a square shape or a rectangle shape to suit the footprint of the machine being mounted.

It can be used with a huge variety of machines including Planer Thicknessers, Table Saws, Bandsaws, Spindle Moulders and Lathes.

Charnwood W522 Specification

Minimum square size340mm x 340mm

Maximum square size930mm x 930mm

Maximum rectangle size520mm x 1340mm

Maximum weight load295kg

Assembly Time Required 20 Minutes

RatingLight trade

Product Guarantee1 Year

This item can only be delivered to Mainland UK, if ordered outwidth of Mainland UK a Refund will be issued.